LetterReady Work with a counselor

Electrical Engineering at UC Davis

What UC Davis expects electrical engineering transfers to finish before fall 2027. Below are Davis’s own preparation and selection rules, UC’s shared course list, the TAG terms and your odds.

Checked against official UC and campus sources in November 2026.

At a glance

Fall 2025 campus admit rate
63.5%
Screens applicants
Yes
TAG GPA line
3.50
Admits transfers
Yes

UC Davis admitted 63.5% of community college applicants for fall 2025, and it doesn’t publish admit rates by major. The middle half of admitted transfers had GPAs from 3.46 to 3.90 for fall 2025.

What Davis expects

  • Electrical Engineering · Computer Engineering

    Courses to finish

    Electrical Engineering requires CHE 002A, ENG 017, EEC 007, MAT 021A/B/C/D, MAT 022A/B and PHY 009A/B/C/D. The first semester of general chemistry may satisfy CHE 002A. Source

    Computer Engineering requires CMN 001 or ENG 003, ENG 017, ECS 020 and 036A/B/C, MAT 021A/B/C/D, MAT 022A/B, PHY 009A/B/C, and ENL 003 or UWP 001. Source

    Selection

    All College of Engineering majors are selective. Non-TAG applicants need a minimum 3.10 cumulative GPA and a 3.20 GPA in major preparation coursework, and Engineering TAG requires at least a 3.50 GPA in both cumulative and major preparation coursework. Source

    Campus rule

    Engineering is selective, its TAG needs a 3.5, and summer courses before transfer don’t count. Source

    Every Davis major

    UC Davis requires a minimum 2.80 GPA for transfer admission, and selective majors require higher overall, series and group GPAs. Source

    Selective major preparation courses must be taken for a letter grade with no grade below C. Pass/No Pass does not count except for winter, spring and summer 2020 courses. Source

    All major preparation and admission requirements must be finished by the end of spring term before fall enrollment. Summer coursework taken before transfer does not count toward admission requirements. Source

UC’s shared course list

UC’s Electrical engineering Transfer Pathway lists the courses that prepare you for this major at every campus, UC Davis included. Where Davis’s own list above asks for more, follow the campus.

CourseStatus
Single variable calculus for STEM majors (one-year sequence)Required
Multivariable/vector calculusRequired
Linear algebraRequired
Ordinary differential equationsRequired
Calculus-based physics (3 semesters / 5 quarters through modern physics, with labs)Required
General chemistry 1 (with lab)Required
Circuit analysis (with lab)Required
Computer programming (one course)Required
Logic designRecommended

Paste your course titles to see which items they cover.

Your results show here: every item on the list, and which of your courses covers it.

This reads course titles. Whether a course counts at a campus is set by ASSIST, so confirm each one there.

TAG for this major

UC Davis’s TAG covers electrical engineering for fall 2027 at a 3.50 UC-transferable GPA. TAG filing runs September 1–30 of the year before you transfer.

UC Davis TAG requirements and timing

Your odds

Move the GPA to see a regular-review range at UC Davis for electrical engineering.

3.40

Far reach

About 10–25% in regular review for applicants like you

With a TAG on file for Electrical Engineering, admission is guaranteed from a 3.50. Filing for fall 2027 closed September 30, 2026.

  • This major is on UC Davis's official selective/capped list — adjusted down (no official by-major rate published, estimated).
  • Major preparation is the factor UC readers weigh most for transfers — often ahead of GPA.

Regular-review estimate for a California resident on track for 60 units and the 7-course pattern, with major prep unconfirmed. The full calculator adds your prep, residency and TAG status.

The same major at other campuses

CampusScreens applicantsTAG
UC BerkeleyYesNo TAG
UCLAYesNo TAG
UC San DiegoYesNo TAG
UC IrvineYes3.40
UC Santa BarbaraYesNot covered
UC Santa CruzYes3.00
UC RiversideYes3.00
UC MercedYes3.00

All nine campuses side by side

Other majors at UC Davis

Questions

What GPA do you need to transfer to UC Davis for electrical engineering?

All College of Engineering majors are selective. Non-TAG applicants need a minimum 3.10 cumulative GPA and a 3.20 GPA in major preparation coursework, and Engineering TAG requires at least a 3.50 GPA in both cumulative and major preparation coursework. A TAG needs at least a 3.50.

What classes do I need to transfer to UC Davis for electrical engineering?

Electrical Engineering requires CHE 002A, ENG 017, EEC 007, MAT 021A/B/C/D, MAT 022A/B and PHY 009A/B/C/D. The first semester of general chemistry may satisfy CHE 002A. Check each course on ASSIST for your college.

Is electrical engineering selective or screened at UC Davis?

Yes. UC Davis screens transfer applicants for it. All College of Engineering majors are selective. Non-TAG applicants need a minimum 3.10 cumulative GPA and a 3.20 GPA in major preparation coursework, and Engineering TAG requires at least a 3.50 GPA in both cumulative and major preparation coursework.

Can I get a TAG for electrical engineering at UC Davis?

Yes, for fall 2027, with at least a 3.50 GPA. TAG filing runs September 1–30 of the year before you transfer.

Sources

  1. UCOP fall 2025 admissions, Table 1a
  2. Davis: Electrical Engineering preparation
  3. Davis: Electrical Engineering rule
  4. Davis: transfer rules for every major
  5. UC Transfer Pathways: Electrical engineering
  6. UC TAG Matrix, fall 2027
  7. ASSIST